Nissan Road Racing Forums

Go Back   Nissan Road Racing Forums > Engine > Forced Induction

Reply
 
Thread Tools Display Modes
  #11  
Old 11-03-2017, 07:43 AM
RalliartRsX RalliartRsX is online now
Senior Member
 
Join Date: Feb 2013
Posts: 750
Default

Quote:
Originally Posted by PoorMans180SX View Post
Keep in mind that is the new 60mm wheel va the GenII 67mm wheel. Quite an improvement if you ask me.

Check out the 3d printed concepts on the raptor engine, the new turbine housings are very EFR-esque. Speaking of which, I’m sure they’re feeling the popularity of the efr range, and it was only a matter of time before they responded. I’m excited for some competition, because we’re going to benefit!
Atleast quote my entire post for proper context lol

Bench racing/paper racing is good for about 30% of real life results. I will come to final judgement once I see this turbo on a real VET (or whatever) doing big things. Bench racing with MAPS is one thing, area under the curve, response, etc is where it's at for everything outside of drag racing, which no amount of flow maps can properly characterize.

EFR is a perfect example of this (remember, they had to up the HP limit as it turns out, they flowed a ton more than originally advertised).

However, as I stated, just like how the EFR was downplayed because of flow maps, Garrett may be on to something here once these hit the streets.

What's good for the goose, may also be good for the gander in this case. Garrett is very capable to making big things happen
Reply With Quote
  #12  
Old 11-03-2017, 07:48 AM
Def Def is online now
Budget Baller to the Max
 
Join Date: Dec 2007
Location: Houston, TX
Posts: 11,878
Send a message via AIM to Def
Default

You can make crazy power running a turbo way off the compressor map, but that sort of usage only works for a hard-parking street car or drag racing. Anything more and it will not prove reliable for either the turbo or the engine most likely as your IATs will go through the roof as your intercooler saturates.


That is impressive flow for a 60 mm turbo, but unless there's a huge leap forward on the turbine side, it's going to be tough to utilize all that compressor flow.
__________________
'18 Chevrolet Volt - Electric fun hatch for DD duty!


DefSport Koni Sleeve and Spring Perch Buy!!!
http://www.nissanroadracing.com/showthread.php?t=5902
Reply With Quote
  #13  
Old 11-03-2017, 10:15 AM
PoorMans180SX PoorMans180SX is offline
Senior Member
 
Join Date: Mar 2010
Location: Mattawan, Michigan
Posts: 477
Send a message via AIM to PoorMans180SX
Default

Quote:
Originally Posted by RalliartRsX View Post
Atleast quote my entire post for proper context lol

Bench racing/paper racing is good for about 30% of real life results. I will come to final judgement once I see this turbo on a real VET (or whatever) doing big things. Bench racing with MAPS is one thing, area under the curve, response, etc is where it's at for everything outside of drag racing, which no amount of flow maps can properly characterize.

EFR is a perfect example of this (remember, they had to up the HP limit as it turns out, they flowed a ton more than originally advertised).

However, as I stated, just like how the EFR was downplayed because of flow maps, Garrett may be on to something here once these hit the streets.

What's good for the goose, may also be good for the gander in this case. Garrett is very capable to making big things happen
Wait, what needed more context? We’re having a discussion and I’m posting up flow charts that are a good indication of performance given they’re generated by the same company. I’m not claiming any kind of results, just interested in comparing to what’s currently available.

Quote:
Originally Posted by Def View Post
You can make crazy power running a turbo way off the compressor map, but that sort of usage only works for a hard-parking street car or drag racing. Anything more and it will not prove reliable for either the turbo or the engine most likely as your IATs will go through the roof as your intercooler saturates.


That is impressive flow for a 60 mm turbo, but unless there's a huge leap forward on the turbine side, it's going to be tough to utilize all that compressor flow.

^this. I’ve worked with Evo dudes for 6 years, in shops that have dyno’s and specialize in tuning them. Evo dudes love big power numbers, and will run whatever they have to to get them. Then they street drive and go to two drag nights a year.

Are the results impressive? Sure, but they’re also not ideal.

The turbine map says it flows about 5-6 more lb/min than the 2867 in the biggest housing. From what I understand, a more efficient compressor also makes the turbine work less. It should definitely be interesting to see what they’ve come up with here.
__________________
Support innovation, buy from companies that design their own parts!

Friends don't let friends buy knock-offs.

Suspension before power.
Reply With Quote
  #14  
Old 11-03-2017, 05:01 PM
croustibat croustibat is offline
Senior Member
 
Join Date: Aug 2011
Posts: 288
Default

Well, prices are out and my expectations were short lived. 2K$ for a non proven turbo design that requires a new elbow, downpipe, hotpipe and header ? And i still need to add the turbine flange and the wastegate ?

Please, someone sell me a 2867 A/R .64 with a T25 flange. There HAS to be someone willing to sell his to get a G25

Seriously, that price tag is higher than EFRs. I cannot see anyone switching to them unless they are desperate about packaging (EFRs are big) or rich garrett fans. Or if these turbos blow EFR where they clearly are better (mainly response)
Reply With Quote
  #15  
Old 11-07-2017, 03:20 PM
PoorMans180SX PoorMans180SX is offline
Senior Member
 
Join Date: Mar 2010
Location: Mattawan, Michigan
Posts: 477
Send a message via AIM to PoorMans180SX
Default

Quote:
Originally Posted by croustibat View Post
Well, prices are out and my expectations were short lived. 2K$ for a non proven turbo design that requires a new elbow, downpipe, hotpipe and header ? And i still need to add the turbine flange and the wastegate ?

Please, someone sell me a 2867 A/R .64 with a T25 flange. There HAS to be someone willing to sell his to get a G25

Seriously, that price tag is higher than EFRs. I cannot see anyone switching to them unless they are desperate about packaging (EFRs are big) or rich garrett fans. Or if these turbos blow EFR where they clearly are better (mainly response)
As with EFR's, the price will come down a little with demand.

http://www.motoiq.com/MagazineArticl...ochargers.aspx
__________________
Support innovation, buy from companies that design their own parts!

Friends don't let friends buy knock-offs.

Suspension before power.
Reply With Quote
  #16  
Old 01-23-2018, 08:16 AM
croustibat croustibat is offline
Senior Member
 
Join Date: Aug 2011
Posts: 288
Default

So, upping this since i will surely go G25 550 for my setup.

Do you know a place that actually has .72 AR IWG for sale ?
Reply With Quote
  #17  
Old 01-23-2018, 10:16 AM
RalliartRsX RalliartRsX is online now
Senior Member
 
Join Date: Feb 2013
Posts: 750
Default

Has the pricing dropped croustibat??
Reply With Quote
  #18  
Old 01-23-2018, 01:19 PM
induetime induetime is online now
Senior Member
 
Join Date: Oct 2010
Location: Phoenix, AZ, USA
Posts: 122
Default

Quote:
Originally Posted by croustibat View Post
So, upping this since i will surely go G25 550 for my setup.

Do you know a place that actually has .72 AR IWG for sale ?
Turbos Direct is local to me & one of the larger Garrett authorized dealers. I can get a quote for you if you want?
__________________
First 300ZX to break 500whp on the Stock Turbo/Stock Long Block, boost only, no meth.
Currently building sub-2800# 300zx Twin BW 6258 EFR, AMB Aero, TA-U & Road Race Car.
Reply With Quote
  #19  
Old 02-11-2018, 05:44 AM
croustibat croustibat is offline
Senior Member
 
Join Date: Aug 2011
Posts: 288
Default

Hi, thanks for the offer, i did not see it until now.
They seemed not available but a few days ago I saw fullrace put a price on their website, so my usual sellers might have them.

If it is not too much of a bother I' like to. Remember I live in France, so no VAT and international shipping. Thanks
Reply With Quote
  #20  
Old 02-13-2018, 12:35 PM
induetime induetime is online now
Senior Member
 
Join Date: Oct 2010
Location: Phoenix, AZ, USA
Posts: 122
Default

I talked to Turbos Direct & they only have the external waste gate housing in currently. When they get the IWG ones I will be stopping by to take a look my self & I will see what they go for.

Quote:
Originally Posted by croustibat View Post
Hi, thanks for the offer, i did not see it until now.
They seemed not available but a few days ago I saw fullrace put a price on their website, so my usual sellers might have them.

If it is not too much of a bother I' like to. Remember I live in France, so no VAT and international shipping. Thanks
__________________
First 300ZX to break 500whp on the Stock Turbo/Stock Long Block, boost only, no meth.
Currently building sub-2800# 300zx Twin BW 6258 EFR, AMB Aero, TA-U & Road Race Car.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vBulletin Style by: kreativfantasy.com
www.nissanroadracing.com