Nissan Road Racing Forums

Nissan Road Racing Forums (http://nissanroadracing.com/index.php)
-   Sentra B13/B14/B15/B16 (http://nissanroadracing.com/forumdisplay.php?f=4)
-   -   Wilwood Clearance Thread (http://nissanroadracing.com/showthread.php?t=1217)

veilside180sx 08-23-2009 12:07 PM

Wilwood Clearance Thread
 
I figured it would be a good idea to have a list here of the wheels that clear the Wilwood/Fastbrakes setup.

11.75"

ATS Comp Lite 15x7 +35
Pro Race 1.2 15x7 +35
Pro Race 1 15x7 +35
949 Racing 6UL 15x7 and 15x8
Volk TE37 15x7 +35
Enkei RS-Evolution 16x7 +35mm

11.00"

Enkei RP02
Rota C8
Rota Subzero
Rota Grid
Kosei K1 15x7 +38

Flunk list



The list is all for the 15" sizes.

Matt93SE 08-24-2009 11:49 AM

Might be worth it to mention which wilwood calipers these are.
I know some of the kits come with Dynalite or Superlite calipers- not sure which application you're referring to.

McCoy 08-24-2009 12:23 PM

Quote:

Originally Posted by Matt93SE (Post 17168)
Might be worth it to mention which wilwood calipers these are.
I know some of the kits come with Dynalite or Superlite calipers- not sure which application you're referring to.

Most all of the verifications above were done with dynalites... as this is the most common setup for the sentra guys for wilwood brake kits.

I did testing on the ATS's, TD 1.0, and TD 1.2's for this list on the SR20forum when I had a sentra and it was with billet dynalites. I miss all these wheels... cheap, light, and durable.

Matt93SE 08-24-2009 12:54 PM

Otay.. In that case, throw 16x7 +35mm Enkei RS-Evolution in the pile for fitting 11.75" rotors. It's got a mm or 2 to spare, but that's about it. :eek:

veilside180sx 08-24-2009 08:39 PM

Quote:

Originally Posted by Matt93SE (Post 17172)
Otay.. In that case, throw 16x7 +35mm Enkei RS-Evolution in the pile for fitting 11.75" rotors. It's got a mm or 2 to spare, but that's about it. :eek:

Added

Cory 08-24-2009 08:57 PM

Quote:

Originally Posted by Matt93SE (Post 17172)
Otay.. In that case, throw 16x7 +35mm Enkei RS-Evolution in the pile for fitting 11.75" rotors. It's got a mm or 2 to spare, but that's about it. :eek:

I will assume you already did this, but if not, watch closely for any contact. I have heard of rims being sawed in half from heat expansion under hard lapping.

Matt93SE 08-24-2009 10:56 PM

I'm using bigger wheels now, but thanks. :)

Fortunately, where the wheels were close to hitting was a part of the clamping assembly and had plenty of room to 'self-clearance' with the caliper.


All times are GMT -7. The time now is 09:48 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
www.nissanroadracing.com