Announcement

Collapse
No announcement yet.

Torn RLCA mounts

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Torn RLCA mounts

    Anyone ever done this before?



    Its a Z32, but the rear subframe is obviously very similar to a 240's. Our car is also very light, at the time the dry weight was around 2,450. We think the damage started when we ran a set of used Michelin slicks at a Sebring enduro.

    The passenger's side was just cracked, and not yet completed failed.
    Attached Files
    Flatout Racing
    #23 Z32 Chumpcar

  • #2
    Yeah, just tore one of mine. The rest looked ok so I just welded it back up. They make (they beig gk tech) a reinforcement kit for the 240's but some basic reinforcements should work well.

    Comment


    • #3
      Just a case of metal fatigue and a strain concentration factor being right next to the weld. Break out 'le MIG gun" and go to town on it. Add some 14-16 Ga gussets while you're at it.
      '18 Chevrolet Volt - Electric fun hatch for DD duty!


      DefSport Koni Sleeve and Spring Perch Buy!!!
      http://www.nissanroadracing.com/showthread.php?t=5902

      Comment

      Working...
      X