Is this ok? 350z brake spacer with z32 calipers on s13

[Bullitt]

I think the pad is sticking out too much with these spacers...

http://img684.imageshack.us/img684/4475/img6428i.jpg

[Bullitt]

This should be the problem

2006+ Non Brembo:
Rotor size Front: 320mm x 28mm
Rotor size Rear: 308mm x 16mm
Caliper Front: Dual piston
Caliper Rear: Single pistion (#192793)

2003+ Brembos
Rotor size Front: 324mm x 30mm
Rotor size Rear: 322mm x 22mm

:( seller told me disc are part no. GD7122, which are brembos, and these aren't...

http://www.summitracing.com/parts/EBC-GD7122/

[Matt93SE]

Yeah, that's too much gap.

you sure those spacers are for the 350Z rotor?

could also be for a 3000GT VR-4 or a Cobra rotor application.
There's lots of kits out there to mount the Z calipers with larger rotors.

That could also be a FWD (Sentra/Altima/Maxima) adapter bracket instead of for a S/Z chassis. the only difference is the caliper is moved out about 4-5mm over the proper RWD bracket.

can you take a pic of the bracket?
I'm gonna laugh if it's what I think it is........