PDA

View Full Version : GC Parts list

ryebreadz28
10-18-2010, 03:30 PM
Does anyone have a complete parts list of what comes in the Ground Control Koni kit? Trying to piece one together separately since I already have the rear springs and sleeves.

If it included the actual spring/sleeve lengths as well, that would be awesome! I saw in another thread the sleeves are 4" in the front, and 2.5" in the rear w/7" springs for a Bilstein setup. Is it the same for Konis (probably not)?
Jason M
10-20-2010, 12:05 PM
Those are the same specs for the sleeves that i got with my gc kit for koni's. Most poeple custom order there springs, so lengths will vary.

I custom ordered 6" springs, but others have 7" springs. When choosing Spring length consider coil bind, and wheel clearance.
Def
10-20-2010, 06:38 PM
Does anyone have a complete parts list of what comes in the Ground Control Koni kit? Trying to piece one together separately since I already have the rear springs and sleeves.

If it included the actual spring/sleeve lengths as well, that would be awesome! I saw in another thread the sleeves are 4" in the front, and 2.5" in the rear w/7" springs for a Bilstein setup. Is it the same for Konis (probably not)?

No idea on stock spring perches, but a 861x setup all around 7" springs work well. I have 6" springs in the rear, but they only really work on the 2.5" rear collars because I have tender springs that are 1" when static/blocked. Otherwise the car would be slammed in the rear.
ryebreadz28
10-26-2010, 01:46 PM
Thanks for the info guys, it helps a lot. Are there any special washers, etc in there? I know torrington bearings should be bought separately.
e1_griego
10-26-2010, 02:18 PM
I have the torrington bearings for the back that I bought from amazon.

Lemme know if you're interested. I'm not using them, all bnib.
ryebreadz28
10-27-2010, 08:09 AM
I have the torrington bearings for the back that I bought from amazon.

Lemme know if you're interested. I'm not using them, all bnib.

Definitely interested, didn't even know the rears required them as well. Are they the same for the front?
e1_griego
10-27-2010, 08:50 AM
Well I bought the 4 washers and 2 bearings that people recommended.

They work front or rear, I just have vorchlag tophats in front.

Shoot me a pm and we'll figure something out :)