Evo rear bilsteins work

[Z28ricer]

http://i239.photobucket.com/albums/ff177/Z28ricer/90hatch/2010-05-29164850.jpg

[jmauld]

That's a 300z rear hub, right?

Is the car a S13, or S14? I'm guessing S13 based on the upper control arm?

[cazman]

whats the extended and compressed lengths?

[WilloW]

Dang, judging from the RUCA I'm also guessing that it is an S13. Nice find though.

[Matt93SE]

Z32 used same upper arm as S13, and are same length as S14 IIRC. I stuck the Z32 arm on my S14 for a while until I made custom arms for it.

[Z28ricer]

I didnt check lengths, but side by side with my oem shocks they were pretty well identical in length, the springs from the evo shocks were too short though, so I had to use the S-chassis eibach pro kit springs I had.

Yes Z32 uprights, S13.

[Scores240]

Is there an advantage to using Evo Bilsteins vs 300zx bilsteins?

[Z28ricer]

AFAIK only if you get them as a set and are planning to make the fronts work also, which is why I used them. Also helps with finding them used.

[mattah]

Bilstein do a PSS9 kit for Evos as well, so you might be able to get that to work on S13s.