racepar1
12-11-2009, 01:01 PM
Project Mu dura camber plates
These are in very good condition, hardly used and the bearings are nice and tight. There are some knicks, scratches and dings though. These ARE heighth adjustable and there IS a significant amount of adjustment in them (5/8"). Unfortuanetly on a shock/spring combo you cannot actually lower the car much with these as the big spring perch interferes with the strut tower. What these ARE perfect for is a set of single heighth adjustable coilovers (I.E. koni/GC setup) as there are no interference issues and you can make full use of the amount of adjustment. They allow you to adjust the strut position to maximize travel while still keeping the tire off the fenderwell under full compression. I would reccomend that you run a set of torrington bearings with these to help with any loosening issues as the sphericals are pretty tight.
SOLD!
These are in very good condition, hardly used and the bearings are nice and tight. There are some knicks, scratches and dings though. These ARE heighth adjustable and there IS a significant amount of adjustment in them (5/8"). Unfortuanetly on a shock/spring combo you cannot actually lower the car much with these as the big spring perch interferes with the strut tower. What these ARE perfect for is a set of single heighth adjustable coilovers (I.E. koni/GC setup) as there are no interference issues and you can make full use of the amount of adjustment. They allow you to adjust the strut position to maximize travel while still keeping the tire off the fenderwell under full compression. I would reccomend that you run a set of torrington bearings with these to help with any loosening issues as the sphericals are pretty tight.
SOLD!